VC10 Innovative AI ADAS dashcam
Compared with traditional dash cams, it is not only used to record driving vision to preserve the evidence after an accident scene but to warn the driver in advance of potential traffic safety risks through real-time voice alerts, which can improve safety and reduce road accident costs.
1. Forward Collision Warning (FCW)
Real-time monitoring the distance between the ahead vehicles, alerting the driver 2.7s before collision.
Work Speed | ≥30km/h |
Detection Range | 2~110m |
2. Headway Monitoring Warning (HMW)
Displaying the distance between the ahead vehicles, alerting when approaching the pre-set distance threshold.
Monitoring Speed | ≥30km/h |
Distance Error Range | <6% |
3. Forward Collision Warning (FCW)
Monitoring the distance between the vehicles ahead when driving at low speed, and reminding the driver to avoid crash when the distance is less than the safe distance
Monitoring Speed | <30km/h |
Alerting Distance | 1.8m |
4. Lane Departure Warning (LDW)
Monitoring the current lane markings and vehicle trajectory, alerting when it is about to deviate from the lane unintentionally, reminding the driver to keep driving in a safe lane.
Monitoring Speed | ≥50km/h |
Monitoring Range | 5~55m |
Operation Remarks
(1). The device can be used in most scenarios such as daytime and night, tunnels, and rainy days (except extreme weather).
(2). It is compatible with types of CAN bus and analog signal wires.
Hardware Parameters
| Category | Parameters | Remarks |
CPU Remarks: The processor chips IC are complaint with the vehicle regulation AEC-Q100 | CPU | Cortex-A9, 2-core |
|
Accelerator | Artix® -7 FPGA |
|
ROM | 1GB SLC |
|
RAM | 512MB DDR3 |
|
Speaker | support |
|
TF Card | Support |
|
Interface | Driving Status Input | CAN | support |
Analog signal input | Left turn signal, right turn signal |
Alarm Signal Output | CAN | support |
CAN Pin Definition | Number | Description |
1 | 5V_Out |
2 | CAN1_H |
3 | CAN2_H |
4 | Power |
5 | Ignition (Compatible with left & right turning signal ) |
6 | CAN2_L |
7 | CAN1_L |
8 | GND |
Camera | Image Sensor | AR0132AT |
|
Dynamic Range | >115dB |
|
Effective Pixel | 1280*960 |
|
Shutter Type | Rolling |
|
Field of View | 52°C |
|
Technical Parameters
| Category | Parameters |
|
Electronics | Radiated Emission | GB/T 18655-2010 | Grade 3 |
Conducted Emission | GB/T 18655-2010 | Grade 3 |
Radiate Susceptibility | GB/T 17619-1998 | 50V/m, A grade |
Electro-Static Discharge | GB/T 19951-2005 | Power on: 8KV (air)/4KV (contact) Power off: 8KV (air)/4KV (contact) |
Bulk Current Injection | GB/T 17619-1998 | 100mA, A grade |
CI | GB/T 21437.2 | 24V， Grade P5 |
VTE | GB/T 21437.3 | 12V/24V |
Rate Voltage | GB/T28046.2-2011 | 7-36V DC |
Rated Power | / | 4W |
Environmental and Mechanical Reliability | High-low Temperature | GB/T 28046.4-2011 | -40°C~95°C |
Resistant to Temperature and Humidity Cycles | GB/T 28046.4-2011 | Compliant |
Salt Spray Test | GB/T 28046.4-2011 | Compliant |
Vibration Test | GB/T 28046.4-2011 | No rust on appearance |
ID Design | Main Unit Size | 116mm*76mm*43.4mm | Compliant |
Monitor Size | 51.3mm*50*25.8mm |
|
Camera Rotating Angle | 21-90° |
|
Material | Plastic, Aluminum alloy |
|
